Graham's Motors and Controls Cycletrol® Series DC adjustable speed controls provide rapid cycling capabilities, while offering higher reliability and lower maintenance compared to clutch/brake mechanisms. The Cycletrol Series consists of two product lines, the 150 Series rated for up to 60 cycles/minute and the C2000 rated for up to 30 cycles/minute.
Common Features:The Cycltrol C200 Serie DC drive provides rapid cycling up to 30 cpm. The C200 serves as an accurate speed and cycling conotrol and is coverred by our two-year warranty.
Specification | Value |
---|---|
Horsepower | 1/8 - 1 hp (120 VAC), 1/8 - 1 hp (240 VAC) |
Line Voltage | 120 V, 240 V |
Frequency | 50/60 Hz |
Phase | Single |
Maximum Duty Cycle | 30 cycles/minute continuous with typical 1 HP motor. Total reflected inertia not to exceed 20% of armature inertia. |
Output - Armature Voltage | 0 to 90 VDC (120 VAC), 0 to 180 VDC (240 VAC) |
Configurations | Chassis, NEMA 12 |
Speed Range (Armature Feedback) | 30:1 full torque |
Speed Regulation (Armature Feedback) | < 5% of base speed (for 95% lad change) |
Speed Regulation (Tachometer Feedback) | < 5% of base speed (for 95% lad change) |
Speed Variation (Due to Line Voltage Fluctuation) | <1% armature voltage change within input power range |
Speed Variation (Due to Thermal Drift) | <2% for control; motor depends on application |
Ambient Temperature | 32 to 104 ºF; 0 to 40 ºC (NEMA 12), 32 to 131 ºF; 0 to 55 ºC (chassis) |
Control Adjustments (Minimum Speed) | Fixed at zero |
Control Adjustments (Maximum Speed) | 50 to 115% of motor base speed |
Control Adjustments (Acceleration) | Fixed at 0.2 seconds |
Control Adjustments (Current Limit) | 10 to 150% control rating |
Inputs (Logic Input) | Start, Stop, Jog, Reset, Override Stop |
Inputs (Analog Speed Inputs) | 5K ohm, 1 watt, potentiometer supplied with controls in an enclosure only. Isolated process signal of 0-10 VDC, 4-20 mA may be used. |
LED Indicators | Power |